FRONT	REAR
Damping force adjustment	30 steps	30 steps
Base valve	-	-
Height adjustable lower bracket	â—‹	â—‹
Upper mount	Spherical bearing	Spherical bearing
Inverted/Normal type	Inverted	Normal
Damper/Spring layout	Coilover	Coilover
Spring rate change at factory	Possible	Possible
Damping force adjustment with wire	-	â—‹
Helper spring (Spring rate N/mm)	-	â—‹ ( 19.8 )

		Factory *2	Test data	Adjustable range High - Low *3	Drivable range High - Low *4
FRONT	Ride height *1	649	641	677 ～ 596	677 ～ 630
	Against stock	-28	-35	0 ～ -81	0 ～ -47
REAR	Ride height *1	646	639	682 ～　583	682 ～　629
	Against stock	-36	-43	0 ～ -99	0 ～ -53

*1. Height from road surface to fender arch. *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.) *3. Adjustable range (However, the lowest value may not be road legal. Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive. Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.) *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.) Caution). Actual data depends on each vehicle.

	F	R
Spring rate N/mm(kgf/mm)	78 ( 8 )	49 ( 5 )
Free height (mm)	200	250
Spring type	Straight	Straight
Recommended range to change spring rate N/mm(kgf/mm)	±20 ( 2 )	±20 ( 2 )

	F	R
Damping force (Rebound/Damping)N*	1250 / 400	700 / 270
Default position of dial	15	15
Remaining damper stroke (Rebound/Damping)mm	35 / 78	81 / 84

	F				R
	Default	Test	Drivable limit High *	Drivable limit Low *	Default	Test	Drivable limit High *	Drivable limit Low *
Length of case (mm)	229	222	254	212	483	476	519	469
Spring Set length(mm)	196	196	196	196	321	321	321	324
Length to ride hight adjuster (mm)	48	41	73	31	163	156	199	146
Lever ratio	1.14				1.00

		F	R
Vehicle weight kg		692	577
Tire size (Air pressure) kPa		225 / 40 - 18 ( 220 )	235 / 40 - 18 ( 220 )
Wheel size		8 JJ × 18 off 35	9 JJ × 18 off 38
Alignment (Toe/Camber)	Test data	0 mm / -2 °00'	0 mm / -2 °30'
	Standard value	in 2 ± 1 mm / -1 °00' ± 45'	in 2.6 ± 2.6 mm / -1 °25' ± 30'