AEM AQ-1 OBDII Data Logging System
$474.00
$658.00
SKU: 30-2501
Free shipping on most orders over $150
The AQ-1 OBDII Data Logger (PN 30-2501) and an AQ-1 OBDII (PN 30-2907-96) wiring harness may be the ultimate data acquisition device for sportsman racers and track day enthusiasts with 2008-up model year vehicles! It reads and records data from a 2008-up vehicle’s OBDII port using a supplied connector on the harness, providing critical engine and chassis data with minimal wiring. Just power the unit, configure the OBDII data in the free setup software and it’s ready to start logging. It also has the ability to read and clear diagnostic trouble codes (DTCs) from the OBDII port.
AQ-1 OBDII Data Logger Features:
- Reads/logs channels from the OBDII port of 2008-up vehicles!
- All data (OBDII, sensors, daisy-chain) saved to single log file with real-time clock!Reads and clears trouble codes
- Easy to set up using intuitive free Setup software
- Four analog inputs for measuring frequency (RPM), 0-5 V or 0-16.5 V
- Four 0-5 V analog inputs with optional pullup resistor for RTD/Thermistor-style sensor
- Three switched digital inputs, 16.5 V MAX
- AEMnet connection included for easy connection to AEMnet enabled devices
- RS-232 serial input included for adding NMEA0183 GPS device
- Internal 3-axis accelerometer ( /- 4g MAX)
- Logging rates of up to 1000 samples/second per channel
- 2GB removable SD card included for log files (Up to 32GB compatible)
- Compact size (4.8" x 4.55" x 1.44") and weather resistant when included protective outer boot is used
- Track mapping capability
- Data downloadable via USB port on the AQ-1, weatherproof USB bulkhead in harness or by pulling the SD card
- Free AEMdata analysis software with HD video encoding for adding data overlays to videos
- Four 0-5V analog inputs with software selectable 2.2k pullup resistor for thermistor (temp) sensors. 0-5v examples: AFR, Boost, Boost before/after intercooler, MAP, Exhaust Backpressure, Crankcase Pressure, Fuel Pressure, Oil Pressure, Clutch Pressure, Brake Pressure, Shock Travel. Thermistor examples: Air Temp, Coolant Temp, EGT, Trans Temp
- Four 0-5V/0-16.5V analog or Frequency inputs for all of the above plus RPM, Driveshaft Speed, Wheel Speed and Turbo Speed
- Three switched digital inputs for Clutch Switch, Line Lock, Nitrous Switch, Line Lock, etc.
- RS232 Serial connection for GPS, older AEM engine management systems that transmit data through serial, etc.
- AEMnet CAN bus for daisy chaining X-Series Wideband Controllers and performance gauges, 4-Channel Wideband AFR Controller and Wideband Failsafe gauges, Vehicle Dynamics Module to add GPS and gyrometer, or Infinity ECU, Series 2 or EMS-4 EMS systems (future upgrade path)